PRESS RELEASE
Contact: Clyne Media
Tel: (615) 662-1616
Fax: (615) 662-1636FOR IMMEDIATE RELEASE
FiberPlex Introduces DMX4 Lighting Control
Components for LightViper™— Lighting control components offer industry standard compliance
for interfacing with LightViper™ fiber optic audio transport snake system —INFOCOMM, ANAHEIM, CA, June 19, 2007 — FiberPlex, Inc., the leading professional audio fiber optic supplier to the sound production and systems contracting industry, has announced the introduction of its new LightViper™ DMX4 System lighting control components which are designed to work with the LightViper state-of-the-art fiber optic audio “snake” systems.
The DMX4 System consists of two (2) 1U 19"-- rack units: the DMX4-i input unit and a DMX4-o output device. Both components will accept four (4) independent lines of DMX control (512 channels x 4, or a total of 2,048 channels).
The DMX4-i has four independent 3-pin and 5-pin XLR-type DMX inputs while the DMX4-o has independent 3-pin and 5-pin XLR-type DMX outputs. Each unit features an RJ45 connector on both the front and rear to connect with the RJ45 control circuit connector on the LightViper system. The DMX data being transported through the “control” connection on the LightViper systems travels along the same fiber as the audio returns so no additional fiber is required. The data transport is one way only, FOH-to-stage. The DMX4 system will work with the LightViper 1832, 4832 and 1808 systems. Mains power to the DMX4 components is supplied from the LightViper systems via the same RJ45 connection.
A 32 x 8 LightViper system with a DMX4 system can be transported using a single, fiber optic pair.
The suggested Manufacturer’s Professional User price for the DMX4 is $675.00 for the pair.
For additional technical information and specifications, go to www.lightviper.com.
...ends 244 words
Editor’s Technical Notes:
FiberPlex manufactures the LightViper fiber optic audio cable transport systems. The LightViper systems offer total signal path isolation between both stage and mixer as well as between the mixer and power amplification; the cable is totally immune to ground loops, RFI, EMI and electromechanical noise, and runs of up to 2 km (1.25 miles or 6,600 feet) can be easily accomplished without signal loss or degradation. FiberPlex includes a limited lifetime warranty with all of its LightViper system components.Additional information can be obtained at www.fiberplex.com or www.lightviper.com.
NOTE: LightViper™ is a registered trademark of FiberPlex, Inc. Other company and product names may be trademarks of the respective companies with which they are associated.
—For more information, contact Ron Neilson, Clyne Media, Inc.: Tel: (615) 500-3261;
Email: ron@clynemedia.com; Web: www.clynemedia.com.
All Rights Reserved.