•home
Photo Files
(Click for high-res
JPG images)
 |
PR AGENCY CONTACT:
Clyne Media, Inc.
Tel: 615.662.1616
Email: eaw@clynemedia.com
Web: www.clynemedia.com/EAW
FOR IMMEDIATE RELEASE
EAW Presents JFL210 Compact Constant Curvature Line Array and Compatible JFL118 Subwoofer
Lightweight, Mobile Line Array Ideal for Variety of Uses
InfoComm, Orlando, FL, USA, June 17, 2009 – EAW, a world leader in audio system technology, presents the JFL210 Compact Constant Curvature Line Array and its compatible sub, the JFL118 Subwoofer. The JFL210 compact line array features a range of EAW’s most innovative line array technologies within a mobile, lightweight package that’s an ideal solution for a multitude of small- and medium-sized applications, including portable and installed A/V as well as musician/DJ uses, and with the introduction of the JFL118, now offers a turnkey loudspeaker solution.
Incorporating constant curvature line array design principles, JFL210 modules form easily configured arrays with very predictable output and coherence, and coverage that is both horizontally symmetric and consistent from short to long throws. And, despite the compact size, modules and arrays both deliver exceptionally high output capability and predictable pattern control. The JFL210 can be flown or stacked in a variety of ways. The enclosure size, shape, weight and rigging are optimized for ease of transport and handling. Arrays may be easily flown or ground stacked, and up to two enclosures may be mounted on a tripod loudspeaker stand or on a pole above a pole-mount capable subwoofer.
Each two-way, full-range JFL210 module utilizes neodymium drivers that provide optimum performance and tireless durability while also further reducing weight. Two 10" (2.5" coil) woofers deliver tight, punchy low-frequency performance, while the 3" (1.4"-exit) compression driver is closely matched with a horn that provides precise directivity. These high-end components contribute to a maximum peak output of more than 130 dB SPL, allowing JFL210 arrays to comfortably fill vast spaces. Performance can be optimized even more precisely with an EAW UX8800 digital processor (4 inputs by 8 outputs) that functions as an excellent overall system manager, processor and controller, while its Gunness Focusing™ alignment and driver processing algorithms dramatically enhance JFL210 line array performance.
Dual Neutrik® Speakon® STX Series jacks are provided on each JFL210. The STX Series’ all-metal housings are extremely rugged and provide weather protection to IP54 when mated with a complimentary STX Series cable connector. The input panel also houses recessed powering mode and HF Shading switches. Both are shrouded with a rubber boot for weather protection. Yes, it’s extremely small and light and easy to handle, but make no mistake – the JFL210 packs an unmatched performance punch in comparison to any other loudspeaker system in its class.
JFL210 Key Features:
? Remarkably small footprint (314 mm / 12.4" H x 631 mm / 24.8" W x 397 mm / 15.6" D)
? Light weight (23.6 kg / 52 lb.)
? Neodymium drivers for superior performance and durability
? Nominal beamwidth: 110° horizontal and 15° vertical
? Easy construction of vertical arrays of up to six units
? User switchable single- and bi-amp modes
? HF Shading switch-optimized array high frequency response in single-amp powering mode
? Optimization for transport by just one person
? EAW UX8800 with Gunness Focusing, further enhancing performance and control
? Easy pole mounting, flying and ground stacking capability
? Integral, high-strength rigging system 10:1 design factor, providing confidence in all flying applications
? Enclosures protection by EAW’s tough RoadCoat™ finishThe JFL210-compatible JFL118 is a lightweight, high-powered, single 18-inch, flyable subwoofer that includes JFL210-compatible rigging fixtures. For use in a multitude of medium-sized applications, including portable and installed A/V as well as musician/DJ, this subwoofer offers a complete system solution. JFL118 enclosure shape, size, weight, rigging and accessory castors are optimized for transport by one to two people. The splay of adjacent enclosures is fixed at 0 degrees, simplifying the requirements of integral rigging. Each module measures 21" (H) by 24.8" (W) by 30" (D) and weighs less than 100 pounds.
Each JFL118 includes integral rigging, which joins up to six enclosures together with a 10:1 safety factor and provides superior balance and stability. Eyebolts screwed into the top of the enclosure simplify rigging in permanently installed applications. Suspended arrays are a common configuration, and the JFL118 can be flown in conjunction with compatible arrays or be flown solely as a sub-only array. A fly bar with multiple fore/aft pick points allows users to set the array angle via gravity. Alternatively, loudspeakers may be stacked directly on top of the JFL118. All enclosures are affixed together using their integral rigging. A ground stack rigging accessory tilts the aiming axis of the bottom of the loudspeaker up to 15 degrees, in order that this system is stacked on a stage so the front rows of an audience may be covered by the loudspeaker. Operating mode is single-amp only with two rear panel NL4 connectors, allowing range system input while a third NL4 is used for a pass thru connection to full range loudspeakers.
JFL118 Subwoofer Key Features:
- Easy configuration: easily rigs and flies above or ground-stacks below loudspeakers.
- Ideal for a wide range of portable and installed AV applications.
- JFL210-Compatible
- Operating range from 31 Hz to 200 Hz reproduces the lowest musical octaves
- Professional Neutrik NL4 Speakon jacks provide secure, flexible connections.
- Neodyium transducers and lightweight rigging contribute to an overall system weight <100 lbs.
- 800 Watt LF allows a maximum peak output of >130 dB SPL and allows JFL118 to fill the largest of spaces.
- EAW construction standard: rugged enclosures, sturdy finish and reinforced steel grilles stand up to road abuse.The EAW JFL210 Compact Constant Curvature Line Array is now available. For more information, please visit www.eaw.com.
###
About EAW
Founded in 1978 and celebrating its 30th Anniversary, Eastern Acoustic Works (EAW) is a global leader in producing high-performance professional audio equipment trusted by the most discerning professionals for every possible sound reinforcement application.About LOUD Technologies Inc.
As the corporate parent for world-recognized brands Alvarez®, Ampeg®, Blackheart®, Crate®, EAW®, Mackie®, Martin Audio® and TAPCO®, LOUD engineers, markets and distributes a wide range of professional audio and musical instrument products worldwide. Our product lines include sound reinforcement systems, analog and digital mixers, guitar and bass amplifiers, and acoustic and electric guitars. These products can be found in professional and project recording studios, video and broadcast suites, post-production facilities, sound reinforcement applications including houses of worship, stadiums and nightclubs, retail locations and on major musical concert tours. The Company distributes its products primarily through retail dealers, mail order outlets and installed sound contractors. The Company has its primary operations in the United States with operations in the United Kingdom, Canada and China. For more information, please see our website: www.loudtechinc.com.EAW is a registered trademark of LOUD Technologies Inc. in the United States and other countries. All other trademarks are the property of their respective owners.
EAW • One Main Street • Whitinsville, MA 01588 • USA
Phone: (425) 402-6108 • Fax: 425-487-4337 • Email: kati.naish@eaw.com • Internet: www.eaw.com
All Rights Reserved.