Photo Files
(Click for high-res
JPG images)

Carl Tatz and Great Divide Studios Owner/Engineer/Producer, Jamie Rosenberg.

Carl Tatz Prepares to Tune Aspen's Maroon Bells With the PhantomFocus System.



Contact: Clyne Media
Tel: (615) 662-1616
Fax: (615) 662-1636



Carl Tatz Design PhantomFocus™ System Causes Weight Gain in Aspen, Colorado

— “It’s often hard to explain and most people don’t really get this PhantomFocus™ stuff until they sit down in front of one. Then they start explaining it to me. I love that moment!” – Carl Tatz —

— Engineer/producer and Aspen, Colorado's Great Divide Studios owner Jamie Rosenberg notes, “I’ve been putting on some pounds since the PhantomFocus™ System implementation, because I no longer have the exercise of constantly rushing out to the car to check my mixes!” —

Nashville, TN: Beyoncé, Burt Bacharach, Ryan Tedder and John Oates are a few of the high-profile clients that book Jamie Rosenberg’s Aspen-based Great Divide Studios in this famous bucolic ski resort setting. Designed by Pilchner-Schoustal of Toronto, Canada, the control room features a soffit-mounted 5.1 system with ATC SCM150ASL Pro monitors and a pair of Adam Audio S3X-H near fields (replacing Adam S3As), now configured in a Carl Tatz Design (CTD) 5.1 Dual PhantomFocus™ System. Although partially satisfied with the soffit-mount speakers, Rosenberg was struggling with his near field set up, not trusting his mixes in either system and having to check them in the car with the hope that that would tell him the truth.

“Jamie gave us a call after studying the PFS brochure on the CTD website and reading various magazine articles,” notes Carl Tatz. “After listening to the issues he was having, I was able to make recommendations, assuring him that we bat a thousand with the PhantomFocus System, and while we were going to travel out to Aspen to implement his near field system, it wouldn’t cost that much more to go ahead and include the 5.1 mains in a Dual PFS. The ATC mains and the Adam near fields share the same subwoofer system, allowing both sets of monitors to now have the same very accurate frequency response and holographic center imaging down to 20Hz.”

“Now I can relax and have absolute trust in what I hear. I’ve had visiting engineers tell me that this is the best monitoring they’ve ever heard - and they’re right!” boasts Rosenberg.

Photo File 1: CTD_GreatDivide.JPG
Photo Caption 1: Carl Tatz and Great Divide Studios Owner/Engineer/Producer, Jamie Rosenberg.

Photo File 2: CTD_Tatz_Mountains.JPG
Photo Caption 2: Carl Tatz Prepares to Tune Aspen's Maroon Bells With the PhantomFocus System.

About the PhantomFocus™ System
Carl Tatz Design’s proprietary PhantomFocus™ System monitor tuning protocol offers clients a unique opportunity to have a truly world-class monitoring experience in their room, no matter how modest they may perceive it to be. The PhantomFocus System allows their monitors of choice toperform accurately at a full 20Hz-to-20KHz frequency response with pinpoint imaging in an almost holographic sweet spot — this enables their mixes to travel anywhere with a new level of sonic accuracy.

There are approximately fifty steps in the proprietary PhantomFocus System implementation protocol, some of which may include phase and laser alignment, damping, isolation mounts, careful assessment of engineer/speaker placement relative to their room’s primary axial modes, proprietary speaker distance and angle and digital processing crossover points for pass filtering, and finally parametric equalization.

Hardware can include monitor stands, concrete, Sorbothane and other isolation materials, custom floating plenum mounts, subwoofer system and digital processor.  The evaluation and implementation is a full two-day process and can be applied to near-fields, mid-fields and large soffit mounted monitors, regardless of manufacturer.

Carl Tatz Design installs the PhantomFocus System in existing control rooms and in all studios that are designed and built from the ground up by CTD. The result is like the aural equivalent of HD TV. Once you experience a PhantomFocus System, you can’t go back.

For more information about the PhantomFocus Monitor System, please contact Carl Tatz Design, 6666 Brookmont Terrace, Suite #1109, Nashville, TN 37205 Office: 615.354.6242, Direct: 615.400.5479  Email: carl@carltatzdesign.com  Web: www.carltatzdesign.com




Copyright ©2011, Clyne Media, Inc.,
All Rights Reserved.